The rubber stamp making business is a very low-cost business. Nowadays there is a great need for rubber stamps in school, tehsil, office, so if you start your business by buying rubber stamp making machine, then you can easily run your livelihood sitting at home.
Many people have come on the streets in the Corona period, they do not have enough money to start any business so that they can start their own business. Many people lost their jobs and many people lost their businesses. Because of all these things, today we are going to tell you about the business of making rubber stamps at a very low cost.
Friends, the question in the mind of many people is how to make a rubber stamp? But this business is so easy that even a fifth pass person can start it. So friends, if you also want to start the business of making rubber stamps, then you must read this article because in this article I am going to give you all the information related to this business.
What is Rubber Stamp?
Friends, the rubber stamp is often spoken in common parlance, which is used in banks, tehsils, schools, colleges, offices, etc. When a file has to be approved, then the sign and stamp of the senior officer are put in place which makes it easier for the people to get their work done further, this certifies whether the required documents are verified or not.
Market Demand For Rubber Stamps?
Friends, as we all know, the rubber stamp manufacturing business can prove to be profitable for you to stamp the form and necessary documents in different types of offices. Nowadays, Stamps are also being used in the field of art designing, so their demand is increasing day by day due to which there is a lot of potential to make a profit in this business.
Rubber stamps are made in the market in two ways: one is embossed on rubber, in which people have to buy a separate ink stamp and the other is that which is the only design impression on the foam. It does not require a separate ink stamp. The stamp that is in demand in the market nowadays is a rubber stamp with foam, so I am going to tell you about the second one in this article, Rubber Stamp Making Business.
Raw Material For Starting Rubber Stamp Business
The raw material used in Rubber Stamp Making Business is as follows –
- Polymer or OHP Sheet – It is used to imprint printed matter on butter paper onto the foam.
- Butter Paper Butter paper is used to print the matter.
- Ink – Ink in foam is used to soak.
- Foam – Foam is the design on which the impression comes.
- Stamp Handle to hold – Which is held and stamped in the hand.
- Tape Foam works by affixing OHP sheet and butter paper.
- Adhesive – Foam is used to stick the handle.
Also, Read – How To Start Placement Agency Business?
Rubber Stamp Making Machine
The list of Rubber Stamp Banane ki Machine is as follows –
- Flash Stamp Machine
- Laptop/Computer
- laser printer
- Scissors
- Small saw
Where To Buy Raw Materials And Machines?
Friends, you can buy raw materials like polymer sheets, butter paper, ink, tape adhesive, scissors, etc. from the stationery shop, besides machines and foam you can buy from IndiaMART. If you do not have a laptop and laser printer, then you can get the matter maker to print as well, this will reduce your investment.
Rubber Stamp Making Process
- Friends, to make a rubber stamp, first of all, the type customer needs to design, in the same way, the design in the Corel draw of the computer.
- Butter paper is then applied to the laser printer and the design is printed.
- After printing the design, the design in which the design is printed is cut with the help of scissors.
- This is followed by cutting off a design shaped polymer sheet or OHP sheet and foam.
- After this, butter paper is first placed on a table, then an OHP sheet is placed on top of the butter paper, then foam is placed on it.
- Now all these are pasted with the help of tape.
- The Flash Stamp Machine is then plugged into the electrical board and the machine is turned on.
- Three types of signals will be seen in the machine red, yellow and green. When the machine is turned on, the yellow and red signals will burn.
- In a few seconds of the machine being turned on, the yellow light will go off and the green light will light up.
- After the green light of the machine burns, open the lid above the machine and place the OHP sheet, butter paper, foam pasted by the tape upside down on the glass in the machine and close the lid.
- After this, press and release the red button on the right side of the green light, then open the lid and take out the foam.
- After taking it out, first, remove the tape, then separate the OHP sheet and butter paper from the foam, now you will see that the impression of the design has come on the foam.
- After this, dip this foam in ink and after removing it for about half an hour, take out the foam from the ink.
- Clean the ink on the foam with a scrap of paper, then apply the adhesive on the backside and stick the foam on a plastic or wooden stamp.
- Now your rubber stamp is ready, which gives about 20,000 impressions.
Select location
You can start the business of making a rubber stamp in a place where there is a school, college, office, factory, bank etc. You do not need much space to start this business even if you have another shop. You can do this business only.
Also, read – How To Start Sleeper Making Business in India?
Where to sell rubber stamps?
Rubber Stamp Making Business does not have to do any type of marketing, but you will have to keep promoting till your people get to know this business. For this, you can get banner posters etc. installed. Apart from this, entrepreneurs can take orders by visiting big companies, schools, colleges, firms, banks, offices, tehsils, factories, shopping malls etc. Apart from this, put a banner in front of where you started your business, in which it is written that the stamp of rubber stamp is made in our place, this will enable the customer to know more and more about your shop.
Registration for Rubber Stamp Business
To start the Rubber Stamp Making Business you will need to take two licenses in a main way –
- GST Registration
- MSME Registration
Rubber Stamp Business Cost
The enterprise does not require a high cost to start the Rubber Stamp Making Business. This is a small business idea, so the cost of the machine and the necessary equipment and raw materials will be around 30,000, in which you can start with a small machine, if you take a big machine then your cost will be more.
Rubber Stamp Business Profit
Friends, although the cost of making a rubber stamp is very low, there is a lot of profit in making a stamp. If you talk about a stamp, then the total expenditure comes from 30 to 50 rupees. A stamp is prepared for at least 30 rupees and a maximum of 50 rupees, which is sold at different prices. A stamp is sold for about Rs 100 to Rs 250. Now it depends on how attractive the stamp is. The better the design of the seal, the price is also found accordingly. From this business, you can earn up to 10 to 15 thousand rupees a month.
Conclusion
Before starting the Rubber Stamp Making Business, you must take its training only then start this business. However, it does not require any special training. If you buy a machine from any machine manufacturer, then you get training from the same. If you want to start this business, then research your market, see how much demand is there and how many orders you can get per day. Even if you get two orders during the day, you can still do it part-time while working at a shop.
Also Read: How To Start Toilet Paper Manufacturing Business?
